Juice Box Wall Mount

Stabilizes JuiceBox/Bag-in-Box when dispensing with the Bag in Box" - Single-Handed Dispenser by BamBam Design

• Wall stop/spacer: Cardboard box is neatly supported and stays in the stand
• Pressure during operation is evenly distributed, cardboard box does not slip away
• 2-part (front optional) – the rear part is the actual stop

Purpose
When dispensing with the "Bag in Box – Single-Handed Dispenser" by BamBam Design, the tap is pushed backward Without a defined stop, the cardboard box moves and is pushed out of the stand

Solution: Spacer / Wall stop
This part serves as a spacer to the wall and at the same time as a stop behind the cardboard box This allows the JuiceBox/Bag-in-Box to be stably placed against a wall: The pressure against the dispenser is evenly transferred to the cardboard box and the cardboard box is supported by the wall, so that it reliably remains in the stand when operating the tap
The spacer was specifically developed for JuiceBox/Bag-in-Box, but depending on the carton dimensions and placement situation, it can also fit other cartons with similar geometry

Why this design?
I had previously used a different solution – which did not prove effective in practice because the cardboard box lifts out of position when pressed against the tap That's why this simple, robust wall stop exists

Structure
The spacer consists of a front and a rear part.
The rear part provides support against the wall; the front part is optional and not strictly necessary

Fits with
As a complement to the model Bag in Box" - Single-Handed Dispenser by BamBam Design (Snap-in single-handed dispenser/adapter for juice or wine bags, typically 3 L and 5 L)

Application

• Place the Bag-in-Box carton so that it is aligned with the wall
• Position the spacer between the wall and the carton so that the carton presses directly against the stop when pushing the tap