OneBlade Charging Stand - Free 3D Print Model

Search models, users, collections, and posts

Chris

Tools>Machine Tools

IP Report

GIF

Print Profile(1)

All

H2D

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill, snug support

Designer

2.8 h

1 plate

4.9(24)

Open in Bambu Studio

Boost

202

569

474

275

Released

Description

OneBlade Charging Stand

-Allows the blade to charge while still being easy to grab

-Walls allow the blade to slide back into charger with ease

-Smooth two blade holders

-Plug Holder

-Additional comb/carrier holder

-Outlet charger holder

-Wire slot to allow stand to sit flush

Print Quality

I'm relatively new to 3D printing, I used Overture PETG as the filament rather than Bambu Lab's because I thought they were all kinda the same but yeah that's probably why there are little layer imperfections but other than that came out good (and works) and I'm ready for my next project. I used PETG but PLA can be used, like I said not fully aware with all the slicer settings but yeah, I used Overture and reduced the speed, but the modification of speed is not saved in the 3MF, I just put it as Generic PETG.

Alright cool, yeah.

Boost Me (for free)

Thanks

Allow adaptations of your work to be shared?

As long as others share in the same way

Allow commercial uses of your work?

philips norelco

philips norelco oneblade

electric shaver stand

oneblade charging stand

oneblade charging

Comment & Rating (25)

@Huthyr

Print Profile

0.2mm layer, 2 walls, 15% infill, snug support

Works perfect 🤝

@user_2339982172

Print Profile

0.2mm layer, 2 walls, 15% infill, snug support

Printed very well

(Edited)

Show original

@user_3105814633

Print Profile

0.2mm layer, 2 walls, 15% infill, snug support

works fine nice print

@titaneumx

Print Profile

0.2mm layer, 2 walls, 15% infill, snug support

it’s kind of nice but sometimes unable to tell if I plugged it in or if it’s actively charging. I don’t like how much the charger end needs to bend to fit this shape. it’s a pretty tight cord fit

@user_1469534467

Print Profile

0.2mm layer, 2 walls, 15% infill, snug support

PLA+ JAYO 👍

@user_2545472789

Print Profile

0.2mm layer, 2 walls, 15% infill, snug support

This model is almost perfect. The only things I would change are: the supports use the default type, but tree supports might reduce filament usage, speed up print time, and be easier to remove. Also, the cable doesn’t sit quite flush, so there’s a bit of wobble. Most importantly, there’s no cutout for the charging LED, so I can’t tell if it’s charging or not. That said, all of these issues can be fixed by the user after printing.