Frogget Me Not - Bookmark

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

'Frogget Me Not' 🐸🌼 brings a little pondside charm to your reading sessions! This bookmark features an adorable frog perched among delicate daisies, giving off the perfect mix of whimsy and nature. 🌿✨ The lush green background and bright white petals make it pop, while the matching tassel adds an extra fun touch. 💚 Whether you're a frog lover, a flower fan, or just want a bookmark that makes you smile, this one's for you! 📖💖

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.2 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

• NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS
   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3 / Amazon
PLA Prusament Army Green Transmission Distance: 0.4 / Amazon
PLA EryOne Apple Green Transmission Distance: 5 / Amazon
PLA KINGROON Orange Transmission Distance: 4.5 / Amazon
PLA Jayo Matte White Transmission Distance: 4.2 / Amazon

Color Pallete 5 Color Version:

Swap Instructions 5 Color Version:

Start with Black
    At layer #8 (0.72mm) swap to Army Green
    At layer #9 (0.8mm) swap to Apple Green
    At layer #12 (1.04mm) swap to Orange
    At layer #15 (1.28mm) swap to Matte White for the rest.
Color Pallete 4 Color Version:

Swap Instructions 4 Color Version:

Start with Black
    At layer #8 (0.72mm) swap to Apple Green
    At layer #12 (1.04mm) swap to Orange
    At layer #15 (1.28mm) swap to Matte White for the rest.

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO

Drop me a follow!🤜🤛