Hueforge - BatMinion

Project: Batminion.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141.4x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 2.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Jade White
    At layer #20 (1.68mm) swap to Yellow for the rest.
 

---------------------------------------

You can find my HUEFORGE models here: https://makerworld.com/es/collections/5516891-hueforge

The final result will depend on the filament used and its TD. Please adjust the layers in Bambu Studio if your filament has a very different TD for a better result.

---------------------------------------

You can find my PUZZLE models here: https://makerworld.com/collections/6089094

----------------------------------------

You can find my "I LOVE" style skyline plates models of different cities here: https://makerworld.com/@luckyfer/collections/5582296-skyline

The size is 150mm base x 50mm height. If you modify the dimensions in the slicer, I recommend changing the values of the X/Y axes, but keeping the dimensions of the Z axis.

I hope you like the result.

------------------------------------------

You can find my keychain models here: https://makerworld.com/es/collections/5572814-llaveros

Thanks for your “likes/boosts”. :)