Majin Vegeta Sacrifice

Made it as a client order and since it looks really good, then why not share it with others ;)

I use a brim just to be sure that the corners wont lift but u dont need it most of the time

The Model is 112.53x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.6mm and the Actual Depth is 1.7mm

Filaments Used:
    PLA Generic Basic Red Transmission Distance: 4
    PLA Generic Black Transmission Distance: 0.3
    PLA Generic Basic Blue Transmission Distance: 4
    PLA Generic Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Red
    At layer #11 (0.96mm) swap to Black
    At layer #14 (1.2mm) swap to Blue
    At layer #16 (1.36mm) swap to Ivory White for the rest.