BEAPER Bot MG90S Servo Holders

These servo holders make it easy to add common and inexpensive, transparent grey, MG90S (metal gear) micro servos to your BEAPER Bot robot. Use this slightly different version for SG90 plastic gear servos.

This set of two, identical servo holders can be attached to most of the dove-tail slots around the outside of the BEAPER Bot, and each holds a servo with its output shaft facing up. Other versions of these servo holders are available to mount SG90 servos at the left side or right side of BEAPER Bot, or to attach a servo with its output shaft aligned horizontally.

Simply snap the servo into the holder – no fasteners are needed! It's easiest to snap the servo into the holder before attaching the holder to your BEAPER Bot.

BEAPER Bot is an easy to use robot chassis for the mirobo.tech BEAPER Nano and BEAPER Pico circuits. The BEAPER Bot robot chassis is available in three versions:

• BEAPER Bot robot chassis
• BEAPER Bot robot chassis with ToF mount - front drive version
• BEAPER Bot robot chassis with ToF mount - rear drive version