Ciondolo Surf NORTH SAILS

Your hoodie, your adventure: personalize it with the North Sails spirit! 🌊🌬️

Don't settle for just any hoodie! Add a distinctive touch that speaks to your passion for the sea and freedom. With the North Sails logo charms, applicable to the drawstrings, you can express your adventurous soul in every detail. Feel the ocean breeze even in your everyday life!

Make your hoodie unique and carry the North Sails energy with you! ✨💙

My charms feature a unique locking system that uses two inserts with protrusions that exert pressure and friction on the hoodie drawstring, creating a secure lock that prevents the charm from sliding or falling inadvertently.

Printing tips

• It is necessary to use a 0.2 nozzle, the logo is very small and requires maximum precision for the text.
• Layer height 0.12, print without supports.
• Use Smooth PEI plate, pay close attention to the cleaning and degreasing of the plate, wash thoroughly with dish soap and then use fixing additives such as stick or spray or lacquer.
• Satisfactory results have been obtained with PLA with a Generic profile, I have not tested other materials.
• Perform plate and filament calibration.
• The profile is for 2 charms and 4 locks and takes less than 2 hours, for every 2 charms kit it takes an additional hour. Pay attention after any cloning that the first objects printed on the first layer are the locks.

If you have problems with multiple pieces write to me, HAVE FUN !!! 

Given the request for a short release, the models without the small text and the profile for a 0.4 nozzle.