Search models, users, collections, and posts
Penny Filled Spool Weight
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
2.1 h
1 plate
Open in Bambu Studio
Boost
10
43
8
1
63
55
Released
Description
Center weight for cardboard spools in AMS.
I found that when the cardboard spools get low they don't like to retract in the AMS. There were some other center weights out there - but they didn't meet my needs. I wanted as close to 250g as possible - so if you use my profile and fill with US Pennies - you will land really close to that. (You can check the print weight before printing - you want the printed model to be as close to 65g as possilbe)
Also, I didn't like the idea of the weight being “loose” or not centered - so there are holders to support the pennies.
Fill with 72 pennies.
Designed for Overture, tested with anycubic and eSun cardboard spools.
Incompatible with AMS-lite
Print in your favorite color/material.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (8)