DJI Osmo Action 5 Pro adapter for Hohem M6 gimbal - Free 3D Print Model

Search models, users, collections, and posts

Bimmer

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

A1 mini

X1E

X1 Carbon

P1S

P1P

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 4 walls, 30% infill

Designer

2.1 h

1 plate

4.8(5)

0.16mm layer, 4 walls, 20% infill

1.8 h

1 plate

Open in Bambu Studio

Boost

119

Released

Description

Boost Me (for free)

Leave a boost if you like the model and appreciate the effort. Thank you!

I created a holder for the DJI Osmo Action 5 Pro for gimbal.
It is designed to be used with the Hohem M6 phone gimbal, but it should also fit other gimbals.

This is the second version, with added balancing at the front, because with the first version one of the motors would heat up after about 20 minutes of use.
It is used with the magnetic quick release that comes with the camera.

To balance the weight I made a compartment that can be loaded using 5 gram weights, used in balancing car wheels.
I used 14 pieces x 5 grams, totaling 70 grams.
After placing the weights on the support, you can use superglue to keep them from falling off the support.

Printed it with Bambu Lab A1, nozzle 0.4, 3 walls, 10% infill, using PETG, for exterior use.

Required:
1. Magnetic Quick Release Adapter, that comes with the camera.
2. 1/4"-20 30mm long screw with the corresponding nut
3. 14 pcs wheel balance weighs 19x12x3mm

Comment & Rating (21)

@user_1000687909

Print Profile

0.16mm layer, 4 walls, 30% infill

great!

@user_4043822863

Boosted

Print Profile

0.16mm layer, 4 walls, 30% infill

Still couldn’t find the counterweight but otherwise I like the design and fit. Thank you.

@user_80700573

Thank you for the fantastic model and design—it’s exactly what I needed! Could you let me know what size ball bearings are used?

The designer has replied

@bimmer2025

I used 10m ball bearings, but you can use anything as long as you get the weight you want and it's balanced. I'm working on a second version now because it's not very balanced vertically and I don't want to stress one of the gimbal motors. I'll be back with the improved version in a day or two.

@user_80700573

Replying to @bimmer2025 :

Thanks for that! When I first saw your model, I thought, “This is exactly what I need!” I bought a gimbal support from AliExpress, but it didn’t fit my DJI Action 5 Pro properly and wasn’t balanced, causing error codes on my Hohem M6 gimbal.

@user_80700573

Replying to @bimmer2025 :

For your new design, may I suggest mounting the camera using the existing magnet mount shoe (as provided by DJI with the GoPro style feet) secured with an M5 bolt or GoPro screw mount? That way, there’s no need to buy another foldable magnetic mount with a center screw—especially since sourcing a 1/4-20 25mm hex bolt has been quite a challenge.