AMS 2 PRO DRY PODS H2D with funnel (XIAOMI,AQARA)

Here is the new version pods for the AMS 2 PRO , off coarse you can dry the filament with the ams 2 pro but you can prolong the low humidity with these pods .                 

DIFFERENT VERSIONS OF THE PODS ARE LINKED BELOW AND ADDED AS A PROFILE ( READ THE TEXT ) LIKE THE RECTANGULAR AND SWITCHBOT  !!!!

When printed in bambu PETG-HF  they can be left in front of the AMS 2 PRO to dry-out the silica while drying the filament , 

(heat deflection temp. for PETG-HF is 69c and for the PETG translucent is even 74c ).  While the AMS can heat up to 65c.

Added optimized funnel makes life easyer to fill them with the silica beads and the seetrough/passthrough model allows for better measurements of the air instead of the silica,  with multi slotted cutout for different orientated tabs on the hygrometers..   (  11 , 12  and  1  o'clock  )

The total set with hygrometer and rear pod hold a total of about 378 grams of silica 

small side pods 40 grams , round hygro 42 grams , regular 96 grams , rear pod 50 grams .. switchbot/round 30 grams ….

Be sure to use dry filament ……and add a drop of lubricant to the faces of the lids for easyer IN/OUT movement when they are tight.

• REAR POD :   https://makerworld.com/en/models/1270826-rear-dry-pod-ams-2-pro#profileId-1297511 NEW OPTIMIZED VERSION !!!
•  
• RECTANGULAR VERSION : https://makerworld.com/en/models/1338822-dry-pod-ams-2-pro-rectangular#profileId-1378799
•  
• BAMBU LOGO POD : https://makerworld.com/en/models/1344087-dry-pod-ams-2-pro-regular-pod-with-logo#profileId-1385246
•  
• SWITCHBOT/GoveeLife SENSOR  : https://makerworld.com/en/models/1484170-dry-pod-ams-2-pro-switchbot-and-round-meter#profileId-1550283
•  
• AMS-HT SILICA DRY POD : https://makerworld.com/en/models/1509489-ams-ht-silica-dry-pod#profileId-1580251
•  
• SEE-TROUGH XIOMI  POD : https://makerworld.com/en/models/1339041-dry-pod-ams-2-pro-xiomi#profileId-1407871
•  
• ANTI RATTLE STEMS  :  https://makerworld.com/en/models/1527213-anti-rattle-clamps-for-the-dry-pods-ams-2-pro#profileId-1601071
•  
• AQARA hygrometer : added as profile and can be bought here : https://www.amazon.nl/dp/B07D37FKGY?ref=ppx_yo2ov_dt_b_fed_asin_title
•  
• SHELLY BLU SENSOR : added as profile and can be bought here : https://www.amazon.nl/dp/B0CXN3LZHJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
•           
• SONOFF SNZB-02P ZIGBEE 3.0  : Added as a new model https://makerworld.com/nl/models/2577645-sonoff-snzb-02p-zigbee-3-0#profileId-2842575

AINIV hygro meter can be bought here : https://www.amazon.nl/dp/B0BMQ386LN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1  

XIOMI hygro meter can be bought here :  https://www.amazon.nl/dp/B08C7KVDJW?ref=ppx_yo2ov_dt_b_fed_asin_title

For the Switchbot sensor with hub for internet connection : https://www.switch-bot.com/products/indoor-outdoor-thermo-hygrometer-combo

For the First edition of the AMS pod's take a look at these   ::  https://makerworld.com/en/models/83952-ams-dry-pods-wide-narrow-hygro-trays-funnel-v3#profileId-89742

or for a matching set :  https://makerworld.com/en/models/1171653-ams-dry-pods-large-small-and-seethrough-multi#profileId-1179978

Be sure to only use the DESIGNER profile as this will be the latest correct version….

I want to thank all of you for the awesome feedback and great comments i have received ;)    much appreciated…

*2/4/25  added a small fillet to the inner ring where the pod sits to make it print continuous and added a chamfer on the inside for more walls.

*13/4/25 Raised the base for the tree support to 5mm instead of 2mm and set 2 wall loops for the support.

*18/4/25 Added venting slots in the lids and also added 2 extra pods for different hygro meters : XIOMI AND AINIV.

*20/4/25 Added another pod this time the rectangular to fit those pods as well.

*21/4/25 Added a regular pod but with seperate printed BAMBU LOGO.

*31/5/25 Modified the smaller side pods to fit better and raised the silica volume with 22% to 40 grams also added brim to funnel.

                  ( thanks @psych and @Bradylew for confirming fitment in different AMS 2 PRO systems ;) .)

*3/6/25   Added the round hygrometer pod with the SWITCHBOT sensor adopted in.

*11/6/25  Added the AMS-HT SILICA DRY POD.

*28/6/25  Added the ANTI RATTLE stems and updated the pictures..

*25/7/25  Removed a small defect which caused problems with the smaller side pods with some people ( Thanks @user_1380314725 )

* 4/10/25 Added a stand by request for easyer filling ..

*3/11/25  Added a round/AQARA adopted pod for the center by request ..

*7/11/25  Added a round/SHELLY BLU adaopted pod for the center by request…

*21/11/25 Added the AQARA only pod to the profile..

*28/11/25 Added the CLEARVIEW pod with acrylic window as a profile..

*25/12/25 Optimized the funnel to flow better and less chance on bouncing ;)

*27/3/26   Added  a pod for the SONOFF SNZB-02P ZIGBEE 3.0 ..