Simple Universal Stand For Everything

This Is the simple universal stand. This can be printed on any printer with a print volume of 100mm or more. The inside is hollow to save on time and filament. It comes in three versions:

•  The short version is highly recommended for use as a phone stand and small photos. The hole in the back is to provide better resonance with speakers and increases sound capacity. The gap between the bottom and the rest is perfect for slotting you're phone to do recording or the Apple TV Face Time feature. The short version is slim enough that the cameras will not be covered up. The short version does require supports for the hole. Prints in 55 min.

   

• The normal size stand is great for a folding phone or a small tablet.  Prints in 1.5 hours.

   

• The long version is recommended for a full size iPad and the pro version and some framed photos. Only the short version requires supports for the overhang on the hole. This version is also awesome for solar charging while on camping trips. I have the Anker Solex PS30 and I can use two long stands and it works great! Prints in two hours.

Printing:

• Filament: PLA, ABS, PETG, doesn't really matter.
• Layer Height: Doesn't matter
• Infill: Grid works great. If you want some extra strength, use Gyroid
• Nozzle: .4mm works great. .6mm if you want it done faster.
• Supports: Recommended for the short stand. The other two don't need it.

If you want to improve this design, you are more than welcome to do so. Just make sure to credit me. Happy Printing! :)