Game Cube Mini Case - Original Hardware
Print Profile(1)
Description
Miniature GameCube enclosure for original GameCube hardware.
The case is smaller and includes mounts for a BlueRetro Bluetooth host, a video-to-HDMI adapter, and port illumination.
Boost Me (for free)
Thank You :)
- Required components:
- Your original GameCube
- BlueRetro Bluetooth Device for GameCube
- 1-4 Bluetooth controllers (any brand)
- Analog Video (GameCube/N64) to HDMI adapter
- RaspberryPi Pico
- MicroSD Card (32GB sufficient)
- GameCube SD SP2 Adapter
- FPC FFC 12-pin 1mm pitch transfer PCB
- FPC FFC 12-pin 1mm pitch forward direction flex cable 300mm
- 3 pairs JST 1.25mm pitch male/female connectors 100mm
- 2x JST 6x6x7mm switches
- 4 blue and 4 white 3mm LEDs (2.8-3V)
- Resistors (68 Ohm optional for white LEDs)
- Assorted cables (AGW28 or AGW30)
- Rubber feed: use original
- Screws:
* LEDs: 2x M2.6x8mm
* Buttons: 4x M1.7x5mm
* Fan: 3x original screws
* BlueRetro: 4x original self-tapping screws
* HDMI: 2x M2x6mm self-tapping screws
* LED panel: 2x M3x6mm
* Chassis: 2x M3x4mm, 2x M3x15mm
* Motherboard: 2x M3.5x10mm, 1x M2x6mm, 1x M1.7x6mm self-tapping screws
* Cooling fins: M3x8mm (drill aluminum with 3.5mm drill bit)
* Pitch transfer PCB: 2x M2.2x6mm self-tapping screws
* Power button: 1x original fan screw
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)