AMD Wraith Cooler mod to 92mm fan
Print Profile(1)
Description
Boost Me (for free)
Modification for ADM Wraith BOX cooler. With this adapter you can replace the original fan with a standard 92x92mm fan.
Important:
Print the adapter with ABS or ASA filament. Standard PLA may melt.
Assembly:
1. screw the adapter to the cooler with the original screws,
2. mount the cooler on the motherboard
3. screw the fan to the adapter with 3x10mm plastic screws
Tips:
1. You can use only four original screws and screw the adapter with two and the fan with two.
2. thin screwdriver is needed to mount the fan
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)