Phyton AMS - Wall Mount
Print Profile(1)
Description
Some of you have already converted the AMS to the Phyton mod. And some, like me, have a space problem.
So where to put the big box? Best on the wall, where the housing can be positioned variably.
I am certainly no professional when it comes to CAD, but I think my solution is quite practical.
The AMS housing is held on the wall/wooden panel by a total of 5 brackets.
The top and bottom brackets are only drawn in one variant, I simply mirrored the counterpart in the slicer.
To prevent the housing from falling down, there is a top bracket that is fixed above the housing.
In case questions arise in this regard.
The individual parts were printed from Prusament PETG, with a layer height of 0.2mm, 3 wall lines and 15% Gyroid infill.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)