Search models, users, collections, and posts
DIY OpenShock Hub (Case)
IP Report
Print Profile(1)
0.08mm layer, High Quality, 2 walls, 15% infill
Designer
2 h
1 plate
Open in Bambu Studio
Boost
7
3
5
0
42
18
Released
Bill of Materials
List other parts
- Lolin WIFI IOT Board x 1: https://www.aliexpress.us/item/3256804457160611.html
- 433 MHz Transmitter x 1: https://www.aliexpress.us/item/2251832634295432.html
Description
This is a Case for the DIY OpenShock Hub.
OpenShock is basically PiShock but way cheaper..
Parts Used:
- S3 V1.0.0 Lolin WIFI BLE IOT Board - https://www.aliexpress.us/item/3256804457160611.html
- 433 MHz Transmitter - https://www.aliexpress.us/item/2251832634295432.html
^ Make sure to use the transmitter and not the receiver.
Files:
- OpenShock Case (F3D)
- OpenShock Case (STL)
- OpenShock Case Lid (STL)
- OpenShock Cover (STL)
Note: This case is designed for the board to lay flat so you can fit the type-c cord. Please try to have little to no solder go on the bottom of the board. This will make the type-c ports higher.
OpenShock Discord: https://discord.gg/8W6XR4V9eK
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)