Search models, users, collections, and posts
Print Profile(4)
Original 14.5in base 0.24mm layer, 3 walls, 25% infill
Designer
2.4 h
1 plate
19in base 0.24mm layer, 3 walls, 25% infill
Designer
4.8 h
2 plates
18in base 0.24mm layer, 3 walls, 25% infill
Designer
4.4 h
2 plates
10in base 0.24mm layer, 3 walls, 25% infill
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
1101
3498
63
41
444
200
Released
Description
These are end pieces for a strawberry cage I built to keep the birds and rats off. I cut off a section off chicken wire and zip tied it onto these ends. It provides an easy, movable cover for plants. The print profile is for PLA but printing out of PETG, ASA, or PC would be much better due to higher UV resistance. All sizes print in two pieces per end which slide together. Mine fit snuggly but I suggest glueing. Also check out the other cylinder version I made here Plant cage ends (cylinder version) by MicahW3DMakerWorld: Download Free 3D Models.
Boost Me (for free)
If you got any enjoyment or use out of this model, please consider boosting. Thanks
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (63)