Search models, users, collections, and posts

【獠霆】NERF Martini-Henry Bayonet Ornament

Print Profile(1)

All
P1S
P1P
X1E
X1
A1
X1 Carbon
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
4.2 h
2 plates
5.0(1)

Open in Bambu Studio
Boost
28
38
4
2
36
13
Released 

Description

Content has been automatically translated.
Show original

Boost Me (for free)

Don't let your support coupons expire!

NERF Martini-Henry "獠霆" bayonet ornament.

 

Specifications:

  • Standard three-edged bayonet, sheathless, historically accurate 55cm blade length
     

Compatible Models:

  • Only compatible with the classic version
  • Tactical version compatible with the addition of a front sight and barrel extension
  • Carbine version compatible with a longer barrel extension and front sight
  • Remove bayonet when using fiber optic front sight kit

Hardware Required:

  • One M3 hex nut
  • One M3x20 (M3x15 or longer) bolt
  • One M3x18 (M3x16 or longer) bolt

Assembly:

  • Glue the two parts of the bayonet blade together
  • Place the ferrule onto the base according to the sample image
  • Using an M3x18 bolt with a hex nut and two printed knobs, tighten into the corresponding positions on the ferrule. Tighten just enough to allow the ferrule to rotate
  • Insert the blade into the base and secure it with an M3x20 bolt. Can also be glued in place

 

Notes:

  • This bayonet model is for decorative/collector use only
  • For safety reasons, the blade is thin-walled, unfilled, blunt-ended and bladeless; impacts can cause damage
  • Handle with care and avoid collisions or improper use

 

For more information on the 【獠霆】launcher, please follow Adicrafts on Bilibili for more information.

 

Comment & Rating (4)

(0/1000)

it worked well but didnt fit on the martini i had so i needed to modify the file a bit, but it still is cool
The designer has replied
0
Reply
It's made for the NERF Martini - Brontusk, not mean to fit the real martini and its replicas unfortunately
0
Reply
Just as the founding fathers intended
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.