Arcs Board Game Building Tokens - City & Starport

• I wanted an token that would work for both the fresh & damages state, but not one that just had to be placed on it's side. 
• Made models that are 2in1, where the damaged version is inside/under the fresh version.
• I also wanted them to fit inside the game's player storage boxes so didn't have to have a separate box for them all.
• Is just a friction fit that holds them together, but works well enough & didn't want to bother with anything fancy like magnets or screws.
   

• Tried to model them after the artwork (starport was harder & strays a little from the art due to the non printable nature of it).
• The non fresh version I tried to model them as if they're under construction (since they come that way also when being built in a system ruled by another player with 0 attacks yet)
  
   

Printing Notes

Version 1

• Printed with a 0.4mm nozzle, could have perhaps done smaller nozzle perhaps, but got the detail I wanted.
• Added supports to the bottom of the top halves, but suppressed them on the upper halves, as wasn't needed.
• The spaceport top half I have on a separate plate as I wanted to use variable layer height to make the curved top look nicer.

Version 2

• Tapered the bottom connection points for a stronger model
• Switched to 0.2mm nozzle
• Put over 3 plates as was more efficient to print that way
   

Not the best model, but happy enough with them since it's the first thing I've modelled from scratch.
Hope you enjoy using them too! :)