Meet the S'not Fairy... one angry little fairy!
Print Profile(3)
Description
Life?... s'not fair.
Let’s be honest, sometimes life is just not fair. Whether you are young or old, life can get messy and when life is not fair, what can you do? The S'not Fairy will remind you it is okay to be frustrated, sad or angry. That you can’t control everything, but you can control how you respond, that you can adapt and pivot. The S'not Fairy will remind you to talk to a friend and not carry the injustice alone. She will help you remember it is temporary, to keep your head up and keep going. Let the S'not Fairy look out for you.
So, when it’s not fair, do not despair, be like the S'not Fairy - glitter in the chaos. ✨
===================================================
Separate print profiles for AMS and single colour version. The non-AMS version can be printed ready for painting in about 1hr 20mins.
At 100% scale she is 90mm tall. She will scale down to approximately 80%, below that she will lose some definition. She'll go up as large as your printer and patience can handle!
The model is designed in 8 pieces, including the lilypad, and should just slot together. There are 3 plates for the AMS version to simplify printing, the non-AMS version prints on one plate (make sure you turn on slim tree supports)
There are matching slots / holes on the body and arm piece, slide the arm piece down from the top and it will just slide into place.
The arms and head should be printed with slim tree supports. You do not need support on the other parts.
Depending on the tolerance of your printer, you may need to trim the wing pegs very slightly as they are deliberately snug. Once the wings are inserted, you can fold them flatter against the body if you wish.
You can also use adaptive / smoothing for a really clean finish on her head and body / dress, but this of course adds to the print time.
This is the second in a series of original characters from The Grumps family. Follow us for updates and new characters coming soon!
You can see the first model in this series - the Wotif, here: https://makerworld.com/en/models/1102400-meet-wotif-the-annoying-little-grump#profileId-1097815
Boost Me (for free)
If you like what we do, please boost so we can bring you more characters that we hope you'll love! ❤️
__________________________________________________________________________________________________
Check out my latest design: Qwatch the fully customisable smartwatch. Only on Makerworld.
https://makerworld.com/en/crowdfunding/273-qwatch-the-customisable-smartwatch
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)