Simple headphone stand

Description

I was looking for a simple headphone stand that actually had proper support for the headband. Since i couldn't really finds one and, I needed some more training in Fusion360, I decided to create one myself. The base and stand are printed seperate and use a press fit. It's a snug press fit which can still be removed quite easily. Depending on used filament/printer/settings ofcourse. Bottom has some small 10mm indents where you could stick some small rubber or filt feet.

Prints in 3h10 using 0.4mm nozzle on my Bambu P1S on 0,2mm layers.

• Base:
  • Print time: 1h37 (roughly)
  • 31grams
• Stand:
  • Print time: 1h27 (roughly) 
  • 23grams
• 2 walls, top 5 layers, bottom 3
• 0.2mm layer, 10% grid infill
• No Supports or brim required
• Included A1 mini plates

Thank you for visiting

I'm just a hobbyist that enjoys printing and creating usefull models. Any likes, shares or even boosts are highly appriciated.