Wrenchholder, hidden screws and french cleat
Print Profile(1)
Description
Made this simple, yet strong and effective wrench holder.
Sliding part for numbers, so it can easily be changed out, or for those using inches, bald eagles etc.
Probably overkill with 4 screwholes, 2 should be enough, but they are hidden anyways.
Also made the bottom with a french cleat, so should work with a 1cm or roughly 3/8" setup.
Boost Me (for free)
This model is from 19-12mm in size. Reduced the couple last “hooks” after print as the 12 was tight.
I printed it in 0.24, but can very quickly be printed with much nicer quality in 0.2 or less, and with ironing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)