Olight I1R 2 Pro watchband case
Print Profile(1)
Description
This is a case for Olight I1R 2 Pro that is designed to be put on a watch strap.
To install the flashlight into the case, start by taking the little split ring from the end of the flashlight off. Then unscrew the flashlight to reveal the USB-C port, and insert it with the port directly centered in the large hole of the case. That should align the little hole where the split ring was in. Then carefully insert the little retaining pin to secure it. That retaining pin may not seem much, but it'll hold the flashlight securely.
To get the best results, there are some settings that should be followed. Print the case with the flat part on the print bed, in concentric top, bottom and infill pattern. That should provide maximum strength so the bridge won't break off. The retaining pin should also be printed lying on its side for maximum strength.
The watchband should be no thicker than 2mm and no wider than 24mm, perfect for NATO-style watch straps.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (3)