Cat toys - Free 3D Print Model

Search models, users, collections, and posts

pixelzone

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

P1P

H2C

P2S

H2S

X1E

H2D

H2D Pro

P1S

A1 mini

X2D

A2L

0.2mm layer, 6 walls, 25% infill, with support

2.6 h

1 plate

3.8(68)

Open in Bambu Studio

Boost

684

2098

2.8 k

1.3 k

Released

Description

Koi mky

Comment & Rating (77)

@user_1324411994

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

my cat loved it and easy to print

Show original

@user_2628644766

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

1 fail, but good design

@small_design

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

printed very well. made only a sample for testing first

@forrestjr

I uploaded a new model with more bed adhesion features turned on. If you still have problems, I recommend this four step process for printing goodness: 1) wash your build plate with dish soap and warm water 2) dry with a lint free towel 3) apply Nano Polymer Adhesive ...great stuff! Does not take much. 4) calibrate and stabilize your machine

@user_1251638136

you can also just use elmers glue stick. I recommend the purple to clear because it'll show it's dry when it's clear indicating you're allowed to print.

@radiasso

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

Bed Adhesion Issue:This was attempt number 3, a complete disaster

@Floriske

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

kkr print

@user_2228486074

why? 🤔

@Floriske

Tried 7 times and failed, I expected more from this

Show original

@Thesunbird

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

my cat loves these, thankyou

@user_1779408795

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

the print turned into spaghetti

@JTripp2013

Print Profile

0.2mm layer, 6 walls, 25% infill, with support

Support Issue:We tried this print three times and had at least one of the toys not print correctly every time. the first time none of the toys printed correctly. The second time I caught one of them having problems and skipped it. we successfully got two of the four balls to be usable.

@user_2362086598

I find that cat ball toys are tough to print cause it really test the adhesion of your build plate, but these toys are also difficult because of their supports. it may be difficult to take apart the support and then it gets stuck inside and there is very little you can do to fix it. I also tried using Bambu Labs cold plate which has great adhesion and it took serious effort to remove from the plate, and it still had issues finishing the print. I may try it again but the supports might be to much work when their are others that are not so difficult.

(Edited)