Wall Mounted Bike Rack - Free 3D Print Model

Search models, users, collections, and posts

ShortCourse

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

H2D

H2S

P2S

P1P

H2C

H2D Pro

X2D

A2L

0.2mm layer, 2 walls, 15% infill

6.1 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

211

745

418

139

Released

Description

This two-piece design bike mount uses a 5/16 inch bolt and nut that can be sourced from Home Depot. It also uses three screws to attach it to the wall, however, these screws will vary depending on your wall type.

Would only recommend printing in ABS or material with equivalent strength.

Comment & Rating (15)

@Kirk2626

This is from the app usually I dont have any problems with the times unless if it really is a huge project

The designer has replied

@ShortCourse

Ahh, that profile is from another user and has a 0.2mm nozzle. The four perimeters is a good idea, if not more, but I would increase to a 0.4mm nozzle if you have one.

@Kirk2626

Replying to @ShortCourse :

ok ty for taking the time to respond appreciate it I will try the nozzle to .04.

@C3RPrints

this is a fantastic design. for anyone looking for the right bolt size at Home Depot it’s a 5/16”x 6 1/4 bolt. I put a flat washer on each side and a lock washer and nut on one side

@Kirk2626

question, why is the time so long on this print?

The designer has replied

@ShortCourse

I'm not sure, as it's heavily dependent on your slicer settings. Are you able to share them?

@user_2415821924

Print Profile

0.2mm layer, 2 walls, 15% infill

Printer great and works great.

@wolla

Print Profile

0.2mm layer, 2 walls, 15% infill

Fantastic design

Show original

@Remmidemmi

Print Profile

0.2mm layer, 2 walls, 15% infill

sehr gut

@user_641139364

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3286964987

Print Profile

0.2mm layer, 2 walls, 15% infill

@CRV.3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1499413992

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.