Kirby Magnet

I designed and printed this model with a 0.2 mm nozzle as a multi-color print.

It incorporates a magnetic slot for an 8x3 mm neodymium magnet, simply inserted after pausing at the designated layer, already configured within the 3mf file.

Magnet from Amazon: https://www.amazon.de/dp/B0BX5WYRMJ?th=1

The included ironing settings work best for me and may vary depending on your printer.

Tips for 5-color application with an AMS:

If the model pauses a second time, proceed as follows:

1. Remove the black filament

2. Insert blue filament – In the slicer, select blue as the same position as the black filament

   

3. Resume printing

   If removing the black filament at the preset pause is not possible, resume printing until it changes to the next color and then manually pause.
   
   Have fun :D