Guitar and Ukulele Wall Mount/Hanger - Free 3D Print Model

Search models, users, collections, and posts

Bert Owen

Hobby & DIY>Music

IP Report

GIF

Print Profile(1)

All

P1S

H2D Pro

P1P

H2C

X1E

P2S

H2S

H2D

X1 Carbon

X2D

A2L

0.2mm layer, 5 walls, 18% infill

Designer

9 h

5 plates

4.7(14)

Open in Bambu Studio

Boost

133

363

290

119

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M4 Button Head Cap Machine Screws (BHCS)

Description

Boost Me (for free)

Every boost is appreciated

UPDATE March 5, 2026: Added a Ukulele mount.

When I developed this wall mount I kept several important factors in mind. The wall mount must not damage the finish of my instruments. It must be strong, and it must hold the instrument securely to prevent it from falling. I tested this model printed with PLA and TPU up to 50 lbs. The strength of this surprised me. When the instrument is placed into the wall mount, the “arms” that are shaped like guitars, turn inward and block the guitar or ukulele from falling out.

If you add optional 5mm x 3mm (2.6) magnets to the print, the moving parts give a satisfying click when they move back into place after the guitar is removed from the mount.

The design is very simple and can be printed in whatever material you like, but I highly recommend TPU for the “arms” that actually touch your guitar when in the mount. PLA is great for the part that mounts to the wall. This ensures that over time the finish is not damaged by the hard plastic. If you just want to test the design, print it all in PLA and see how you like it.

To put this model together you will need two M4 x 30 screws. You may get away with a M4 x 25 if you have them. The holder is mounted on the wall with wood screws that slot into the back of the holder. I included a screw template for positioning the mount onto the wall.

Comment & Rating (28)

@user_224990111

Print Profile

0.2mm layer, 5 walls, 18% infill

Perfect print! Thank you for the design and the thoughtfulness to have a mounting template.

The profile uploader has replied

@Bertowen

That looks great. Thanks for the rating and photo.

@itsmiami

Print Profile

0.2mm layer, 5 walls, 18% infill

PETG and TPU mix. Looks fantastic and works as it should. Fun, easy print.

The profile uploader has replied

@Bertowen

Thank you so much for the great review. Your print looks fantastic.

(Edited)

@user_2047814127

Print Profile

0.2mm layer, 5 walls, 18% infill

Printed in pink and clear. she loved it!!

@Lazaru5

just printing 3 of these, do they take 1 bolt each side, and is the lower hole for a magnet so they snap back into place

The designer has replied

@Bertowen

Yes they take one screw each on both sides so that they can rotate into position when placing the instrument into position. Don't tighten the screws too tight. A total of four magnets can be used to "snap" the arms back in position when the instrument is removed from the holder. The magnets are optional.

@Bertowen

Replying to @Bertowen :

The bottom holes are for the magnets and they need two on both sides. To keep the polarity correct I put two magnets together and press the magnets in place by squeezing the two part together.

@Lazaru5

Replying to @Bertowen :

thankyou,

@user_3865256463

Print Profile

0.2mm layer, 5 walls, 18% infill

@user_3705025493

Print Profile

0.2mm layer, 5 walls, 18% infill

I wish this would have turned out, such a great idea. there wasn't any support under the neck area.

The profile uploader has replied

@Bertowen

Thank you so much for pointing this out. I corrected the problem and added the support that is required to print this properly. Sorry you wasted your time and material printing it.

@user_3705025493

right on, thanks for sharing that information and changing things up! I'll try it again 😁

@Monaana

Boosted

perfect print, thank you very much

The designer has replied

@Bertowen

Thanks for the great review and boost.

@AgentBunny

Boosted

when I’m home this next weekend, I’ll measure my 6 string and 7 string electric guitars to send you accurate measurements. An electric one will be awesome too. I’m going to print these for my acoustics later today. they look amazing!

The designer has replied

@Bertowen

Cool. it would be good to have the measurements with drawings of where you measured them.

@chopperfan

Do you have files that will fit electric guitars? Because it will not fit the electric guitars.It sits on the tuning pegs, and it will bend them

The designer has replied

@Bertowen

I don't have an electric guitar to measure it in order to make a design. If you send me a photo of your guitar neck with accurate measurements I may be able to make it for you. measure the neck width, the width of the spots you want the arms to rest on. I will have to offset the arms so that they are at different heights for some electric guitars. It gets complicated to fit all instruments.

@user_3654490139

Print Profile

0.2mm layer, 5 walls, 18% infill

some of the details on the smaller guitars werent as defined as would have liked them to be.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Guitar Wall Mount

VICLER

22.3 k

5.9 k

Ukulele wall mount -Guitar wall mount

omriklein

921

169

Guitars and Ukulele Wall Hangers

Vegatype

173

Ukulele or Guitar Wall Mount

Roni