Sonic Multipart (NO AMS)
Print Profile(6)
Description
This model is designed to be printed in Multicolor using any 3D printer, without the need for an AMS.
The model is split into separate parts based on color. Simply print the plates in the corresponding filament colors and assemble them like a 3D puzzle.
Complete the Collection!
Don't miss the other friends and versions:
- Tails is available here: https://makerworld.com/es/models/1790010-tails-multipart-no-ams#profileId-1907563
- Christmas Edition (Lightbox): https://makerworld.com/es/models/2033893-sega-christmas-lightbox#profileId-2193698
- Sonic Reversible Keychain - Optimized: https://makerworld.com/en/models/2770572-sonic-reversible-keychain-optimized#profileId-3077396
A1 Mini Users
A specific profile for Bambu Lab A1 Mini is available!
- Content: FULL SET! (Figure, Base, and Wings included). Everything fits perfectly at 81% scale.
Colors Needed
To get the result in the photos, you will need:
- Blue: Body and head spikes.
- Beige/Skin: Arms, belly, and face.
- Red: Shoes.
- White: Gloves, socks, and eyes.
- Black: Nose and base.
The Wings Logo (Color Change)
Note: The "Circle with Wings" is not multipart. It is printed in one piece using pauses (filament changes). If you print at 0.32mm layer height, follow these steps:
- Start: White filament.
- Layer 4: Pause and change to Yellow.
- Layer 7: Pause and change to Blue (until the end).
Print Settings
- Layer Height: 0.32mm (Recommended). This creates a cool texture and prints very fast!
- Infill: 10-15% Gyroid.
- Brim: Recommended for smaller parts.
- Extra: Sonic has a small hole on the back so you can hang it on the wall.
Assembly & Tolerances
This model is designed with a 0.2mm offset between parts. First Step: Print the "Test Piece" (Index Finger) in White.
Troubleshooting:
- If it fits well: Perfect! It might be hard to remove later, so be careful.
- If it doesn't fit: You need to adjust the "X-Y Contour Compensation" and "Hole Compensation".
- Too Tight? Try setting -0.02mm for the contour and +0.02mm for the hole.
- Too Loose? Do the opposite: +0.02mm contour / -0.02mm gap.
- Glue: The eyes require glue. For the rest, glue is recommended for a solid finish.
Boost Me (for free)
❤️ Support my work! If you like this model, please leave a Like and a Boost 🚀. It helps me a lot to create more designs like this!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (49)