Iron Titan Golem v2 DnD RPG Miniature

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support.

Iron Titan Golem v2

Forged in the deepest dwarven forges and imbued with ancient enchantments, the Iron Titan Golem is a walking fortress of steel and raw power. Its unyielding metal frame shrugs off swords, arrows, and even the mightiest of spells, making it an unstoppable force on the battlefield. With fists like battering rams and a body of unbreakable iron, it stands as the ultimate guardian of lost civilizations, arcane vaults, or the darkest dungeons.

This highly detailed 3D printable model is perfect for tabletop RPGs such as Dungeons & Dragons, Pathfinder, and other fantasy wargames. Whether as a towering automaton, a relic of an ancient war, or a mechanized nightmare, the Iron Titan Golem brings a sense of dread and awe to any game session.

Beyond gaming, this model makes an impressive decorative piece, ideal for display on a shelf, desk, or in a collection of fantasy miniatures. Its armored design and intricate mechanical details also offer an exciting challenge for miniature painters looking to create the perfect battle-worn metal effect.

Summon the unbreakable guardian—print, paint, and let the Iron Titan Golem dominate your fantasy world!

Recommendations: In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

•  

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support