Ancient Wooden Golem DnD RPG - Dungeons miniature

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support.

Ancient Wooden Golem

If you like my work, I invite you to help in the contest. Every download and like means a lot to me. Thank you very much for your help.

https://makerworld.com/en/models/1300401-slime-benchy-the-ooze-of-the-print-swamp#profileId-1332609

From the heart of the enchanted forest, where the roots whisper forgotten tales, emerges this Ancient Wooden Golem—a guardian of the wilds, a relic of ancient magics, and a formidable force against those who dare disturb the balance of nature.

This highly detailed 3D printable model is perfect for tabletop RPGs such as Dungeons & Dragons, Pathfinder, or any fantasy skirmish game where the forces of nature rise to battle. Whether as a mighty summon, a cursed guardian, or an ancient elemental, this golem will add depth and immersion to your campaign.

But its purpose extends beyond the battlefield—printed in high quality, it serves as an eye-catching decorative piece, a collector’s display, or even a unique toy for fantasy lovers. The organic, twisting bark textures and imposing stance make it a stunning conversation piece for any shelf or desk.

Unleash the power of nature with this Wooden Golem—print it and bring your fantasy world to life!

Due to many detailed pieces please be very careful when removing the supports or be prepared to glue XD

Recommendations: In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

•  

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support