Sterilite 2252LAB8F (6Qt/5.7L) Storage Bin with Divider

This is a divider system for the Sterilite 2252LAB8F Storage Bins. You can find them on Amazon at https://amzn.to/43Vpmqi [affiliate link].

I have made them available in both .07" and .25" thickness, and a vesion that has “feet” that will rest in the groove that runs along the outer edge of the bin, as well as a version without the “feet” that is just flat across the bottom, incase you want to position one of the dividers in the mid section, where there is no groove. 

There's a recess at the top of the dividers so that you can put the lid on with the dividers still in place, or you can leave the lid off and use the recess to stack additional bins on top. You can use them with or without the braces, but the braces will help to ensure the bottoms of the dividers do not slide around when there are items pressing against them. 

To use the braces, simply press them on as shown in the images - you may need a little force, but that's intentional so that they do not slip off accidentally. I recommend putting them on from an angle vs striaght on, as I beveled the corners some to make it a little easier that way.

As of now, there is only 1 length of brace, which will space the dividers 3-2/3" apart, dividing the bin into thirds. If there is enough demand for it, I will add other lengths of braces as well, just let me know!

---===[ UPDATES ]===---

3/26/2025: I stood the spacers on their edge to reinforce where the tabs connect at the base. I had an issue with a few of them snapping off. This will add flexibility due to the orientation of the layer lines. I also made the gap in the spacer slighly larger for a more precise fit. I also added mouse ears near the ends of the spacers to help improve bed adhesion, since they cool very fast being narrow. I also increased the z-hop from .4mm to .6mm to help overcome any issues if it does curl up some.