Cricut Maker Wall Mount
Print Profile(1)
Description
This wall mount utilizes the four screws already in the bottom of the cricut. Remove the rubber feet on the bottom and install the brackets. The other half of the brackets mounts to the wall. It was designed to mount to a board of your choice that is mounted to the studs(see picture for reference). This model was designed around the original cricut maker so I’m not sure if it will fit the cricut maker 3 or 4. This mount Was designed to store the cricut on the wall. Not sure how it would operate while mounted to the wall.
The brackets should be mounted 20 9/16 inches apart measuring from the outside of each bracket. Once all brackets are mounted securely hook the top of the bracket and gently seat it into the wall bracket. Then gently press the bottom to lock into bracket.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)