Slimline / Micro case for the jhewlitt wardriver

Krrawn's Wardriver Case v0.2

This is a printable case for the Jhewitt wardriver (https://jhewitt.net/portable_wardriver)

Can be printed FDM or Resin, whichever you have or feel comfortable with.

In the ZIP there is a suggested print orientation but feel free to print however your printer/material works best.

Walls and infil do not matter much, dealers choice.

you will need to install the bulk head connectors for the antennas first and then lift/move the wires out of the way for the board install. The screen will clip into the lid using the nibs for retention
Lid is retained with 4x m3 between 6mm and 10mm in length.

Big thanks to team #wardriving for helping with testing and fitment. 
If you have any issues please feel free to contact me @krrawn on twitter/ig/matrix

Lastly the files are being released under CC BY-NC 4.0 DEED

You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:
Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes .

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.