Hueforge Faceless girl
Print Profile(1)
Description
Boost Me (for free)
If you liked it or found it useful, you will help me develop new part or project ! it' free!!
Faceless Girl,
Only 4 colors, for this i used sunlu colors , Black , Purple , Red and White
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Purple Transmission Distance: 6
PLA Sunlu Meta red Transmission Distance: 7
PLA Sunlu Meta White Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.64mm) swap to Purple
At layer #11 (1.04mm) swap to red
At layer #12 (1.12mm) swap to Purple
At layer #14 (1.28mm) swap to red
At layer #17 (1.52mm) swap to White for the rest.
Enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)