20ft. Container in 1:24 (also for LGB)

I designed this 1:24 scale 20-foot container model. It is therefore also very suitable for garden railways (LGB, G gauge). The doors can be opened.

Since the side walls, roof, and base are each approximately 24.5cm long, a correspondingly large printer is required.

The individual parts are printed and then glued together with superglue. The front wall including doors is printed in one piece (Print in Place)

Printing parameters:
Material: PLA (however, PETG/ABS/ASA are recommended for predominant outdoor use)
Nozzle: 0.4
Layer Height: 0.2
Perimeters: 2
Top/Bottom Layers: 3
Infill: 15% Gyroid

You can find more 1:24 scale models by me here: https://makerworld.com/en/collections/5684378-1-24-modellbau-scalemodeling