Search models, users, collections, and posts
Fidget Cactus / Ratcheting Cactus (PRINT IN PLACE)
IP Report
Print Profile(1)
Original Print, 0.2mm layers, 15% lightning infill
Designer
38 min
1 plate
Open in Bambu Studio
Boost
13
31
0
0
23
10
Released
Description
PLEASE READ WHEN PRINTING
- The .3mf file has a pause in the slicer which allows you to change filaments for the cactus, NO AMS NEEDED!
- DO NOT use supports or brim, not matter what the slicer tells you!
- VERY IMPORTANT: After it's done printing, let it cool down and take off the bed. Press down on the cactus firmly until you hear a click, then it will be able to twist.
- This was tested on the Anycubic Kobra 2 Neo & the Neptune 4 Pro, it should work on Bambu Lab Printers. If it doesn't, please feel free to add a comment and I will try and fix it.
- Anycubic Kobra 2 and Kobra 3 series, Bambu Lab printers, and Neptune 4 series should be able to print this without setting changes.
- If your printer ISN'T one of the printers listed above AND has bad tolerances please be aware the print might not work. You might have to change settings in order for this print to work.
Most importantly, HAVE FUN!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)