AC/DC Bell Holder Hells Bells
Print Profile(2)
Description
Here is a bell holder designed for the AC/DC bell.
Here is the link to the bell:
https://www.thingiverse.com/thing:4176717 by Zipfl0815
The bell is not mine, only the holder!!
Please note the following.
The two-part holder must be assembled, but please note that the connection must be secured with a good adhesive or superglue, as the weight of the bell will otherwise pull the holder out. If it does not fit together immediately, simply do some minor filing. To make the lettering a different color, you must set a marker at 3.2 mm on the plate and then change the filament. This is very easy to do in Bambu Studio.
The bell diameter should not exceed 20 cm, otherwise the hook will no longer fit. If you print the bell larger, adjust the scaling of the hook accordingly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (109)