12-inch Dollhouse Puzzle Board

A self-modeled dollhouse assembly board. Due to my A1 mini, for ease of printing, only a 12-inch size has been made. Other sizes may be uploaded later.
After repeated tolerance testing, it can now be assembled by hand without glue (including magnet installation).

The layout is very flexible; you can decide the dollhouse size and door and window positions yourself to suit dolls of different heights and miniature toys. Different styles of doors and windows can be interchanged (door and window models will be uploaded later, or you can make your own)
Different colors can be freely spliced together. You can print only the floor section and place it in other dollhouses.
After embedding magnets, you can set partitions inside the house to change the layout (magnet size: 10x3x3 mm; the actual size of magnets bought on Taobao is smaller. I modified it twice more for this. Now the magnets can be directly pressed in; pay attention to the positive and negative poles; if installed incorrectly, use a larger magnet to take them out).
If you don't like the gaps in the walls, you can paste wallpaper separately.
If you don't like it or want to change the size, you can take it apart and reassemble it at any time. It is dismountable and easy to store.
Three panels of boards consume about 300 grams of filament.
It cannot be assembled into very large sizes.
If anyone is willing to make and share related door and window models, you can modify my model and upload it, please do not only modify the size and upload it.