Boulderland Small Scale Rock Crawler Terrain Tiles

Search models, users, collections, and posts

BATTCAVE

Tools>Gadgets

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

1/24 Scale - All 18 Tiles - 0.28mm layer 2 walls 10% infill

Designer

113.7 h

18 plates

4.9(34)

Mini-Z - A1 Mini - All 18 - 0.28mm layer, 2 walls 10% infill

Designer

91.4 h

18 plates

5.0(20)

Risers - Full Set - 200mm - 0.28mm layer 2 walls 15% infill

Designer

11.2 h

4 plates

5.0(2)

Open in Bambu Studio

Boost

638

1774

1.4 k

695

Released

Description

18 different terrain tiles designed for 1/24 scale off road rock crawlers. A smaller version is offered for A1 Mini users and Kyosho Mini-Z Crawlers. Each tile offers 4 choices for orientation to make your course as easy or hard as you want. They can of course be used for anything at all!

200mm X 200mm Tiles work great with the rubber feet of your choice installed. A little gaffers tape can add some extra anchoring. Mini-Z/A1 Mini Version is 175X175.

200, 150, 100 and 50mm risers too so you can create elevation changes and increase difficulty.

Profiles optimized to use as little filament as possible. Extra draft mode provides faster prints AND extra traction. You can 100% ignore overhang warnings for Shattered and Cratered tiles.

Bridge Anchor Cliff has holes for paracord and works great with my “Sketchy Bridge” that you can download HERE.

Need some TPU cones for course setting? THESE work great.

Examples printed in PLA+.

Expect add ons and accessories.

Happy Trails!

Comment & Rating (94)

@Salcmp

Boosted

Print Profile

1/24 Scale - All 18 Tiles - 0.28mm layer 2 walls 10% infill

Printed great with pla and .8 nozzle in 3 hrs 45 min. These are designed very well,i think you could drive a real truck over them,lol. thank you

(Edited)

The profile uploader has replied

@user_1405166896

I am sure the .8 nozzle makes for some extra grip.

(Edited)

@Salcmp

Boosted

Replying to @user_1405166896 :

👍🏼

@BattCave

Thank you!

(Edited)

@Mikejudd72

Print Profile

1/24 Scale - All 18 Tiles - 0.28mm layer 2 walls 10% infill

It takes a bit to print, but so much fun in the hobby room.

(Edited)

The profile uploader has replied

@BattCave

Thank you!

@WB3D

Boosted

Was so pleased to find a ready to go crawler obstacles for the A1 mini, printed 3 so far and have all been flawless. I added fuzzy skin to the rocks for some extra grip though probably not required For a fcx24 k5 they are perhaps a tad easy but that's due to the tiles being smaller and the rig being closer to a 1:18th!! Still the best I have found for a A1 Mini though!

The designer has replied

@BattCave

Thank you!

@user_2423611812

Boosted

Print Profile

1/24 Scale - All 18 Tiles - 0.28mm layer 2 walls 10% infill

this came out amazing!!!!

The profile uploader has replied

@BattCave

Thank you!

@UH_sas_IN

Prints came out awesome! Print hack: Set "Space Infill Pattern" to lighting. It'll save time and a ton of filament. It looks sketchy while its being made but they come out perfect. The biggest piece goes from 461g to 222g and from 11hr to 6h. I ran it on ludicrous for the base and then switched to sport for the rest. That cut it down to like 4.5-5 hours.

@Pablitos_Way

Print Profile

Mini-Z - A1 Mini - All 18 - 0.28mm layer, 2 walls 10% infill

very nice set specially if you own an A1 mini like myself, works perfectly with scx30 and scx24 crawlers

@user_671976824

you should make a clip to hold them together. I love these awesome set

@user_2251440274

I have only printed these three but I want to print all of them these are great

@user_3425498443

awesome prints!! I made a handful for the new scx30 Jeep and it’s so perfect. I used the A1 mini profile

@user_2897145662

Print Profile

1/24 Scale - All 18 Tiles - 0.28mm layer 2 walls 10% infill

Printed out great!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.