Gridfinity Bambu Fully Assembled Hot End Holder Remixed by tlm

Remixed by

tlm

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

2.9 h

1 plate

5.0(29)

Bicolor 4x Holder 0.4mm nozzle, 0.2mm layer, 2 walls

2.5 h

1 plate

5.0(4)

Bicolor 4x Holder 0.6mm nozzle, 0.3mm layer, 2 walls

1.9 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

197

355

216

Released

Description

This model uses the awesome hot end holder designed by https://www.printables.com/@MyStoopidStuff and turns it into a Gridfinity container for easy retrieval of hot ends displaying their size.

Please note this is designed for fully assembled hot ends. For non assembled hot ends see my other model.

At the moment I have only designed the single holder for 4 hot ends. However if there is need for more or less hot end storage it can be expanded. Gridfinity boxes are also designed to be stackable if needed and have cutouts for 6x2mm magnets.

Holder also includes holes for spare screws. The screw sit slightly proud so they can be pulled out with a finger nail.

You may also like my other Bambu Gridfinity models:

Comment & Rating (46)

@benwilks81

fits great, thanks for the print :)

The designer has replied

@tlmprints

Looking good.

@PTejada

Print Profile

0.2mm layer, 2 walls, 15% infill

printed at high speed with eSun PLA-HS. lots of outside strings but nearly perfect where it counts.

(Edited)

@TheBums

I appreciate the bottom picture! I was trying to figure out how many spaces this would take up.

@user_2178288565

Print Profile

0.2mm layer, 2 walls, 15% infill

quality print

@TrioxV1

Print Profile

0.2mm layer, 2 walls, 15% infill

Great fit and use of space, stackability is also a big + Printed in Prindano PLA+ Pro White

@Zack_Solo

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in PETG. Works Perfectly.

@jinivus

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model! Thank you!

@darren.meier

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed without issue, fitment is fine.

@arvscruz23

Print Profile

0.2mm layer, 2 walls, 15% infill

I like the design and able to store my hot ends

@CullenJWebb

This model is excellent. I needed to drill out the holes as it was a bit too snug off of my P1S, but otherwise everything fits perfectly. I added my profile for a 0.6 nozzle with slicing for 2 colors.