1" Hose fitting - adapter 1" Thread to 1" Hose - Free 3D Print Model

Search models, users, collections, and posts

SkampyCraft

Tools>Gadgets

IP Report

Print Profile(1)

All

X1 Carbon

A1 mini

H2C

P1S

H2D

X1E

P2S

P1P

H2D Pro

H2S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

5.0(11)

Open in Bambu Studio

Boost

169

441

587

227

Released

Description

🚿 1" Hose Fitting Adapter – Threaded to Barb (Pump Connector) 🌿

🧩 Key Features:

1 inch male thread (fits standard pump outlets)
1 inch hose barb – secure fit with or without a clamp
Made for tight, leak-resistant connections
Printed from PETG for added strength and water resistance
Ideal for garden pumps, irrigation systems, or DIY water setups

🖨️ Print tested in PETG – durable, temperature-resistant, and built to handle outdoor use.

☕ Buy me a coffee

If you like this model and want to support my work, you can buy me a coffee:

https://buymeacoffee.com/skampy61a

Boost Me (for free)

"Do you like this model? I’d be happy if you gave me a boost. Thank you."

Membership

I greatly appreciate any support. If you are interested in a commercial license, you can become a member.

Join

Comment & Rating (17)

@user_3498695781

Print Profile

0.2mm layer, 2 walls, 15% infill

needed hose connector and couldn't wait for Amazon . Threads came out really well. Sealed perfectly

The profile uploader has replied

@skampy61

Thank you for your rating. ;)

@LeBress

Print Profile

0.2mm layer, 2 walls, 15% infill

thank you

The profile uploader has replied

Show original

@skampy61

Thank you for your rating.

@user_1727112102

I would be interested in the adapter only in 3/4 inch

Show original

@gauchomaker76

Print Profile

0.2mm layer, 2 walls, 15% infill

grabbed the wrong one; I needed hose thread, but this printed beautifully.

@user_3415706787

The 1" thread fits perfectly into the pump! However, the shaft for the hose could be stronger; it broke when tightening the hose clamp on an inexpensive hose, and it was already very difficult to pull it over; with a stiffer premium hose, there's no chance… these barbs for the hose should be a bit smaller, and the shaft at least twice as thick; then it would be perfect and truly "highly recommended"

Show original