Blue Compass Microphone Arm Cable Organizer

Another model in the desk organisation series – this time for my Blue Compass (now Logitech) Microphone arm and XLR cable. This clip slides over the arm’s base before inserting into the desk clamp and securely organises the cable out of sight without compromising the cable or needing cable ties.

Available in 4 versions, a simple clip version if that’s all you wish, and then three versions depending on the placement of the microphone arm on your desk: left side, right side or rear (please be sure to print the correct plate within the 3mf file for your needs).

To install the print on your microphone arm you will need to unplug the XLR cable and lift the arm out of the base. Pass the cable through the print and press it into the small groove, then insert the arm’s lower portion through the print (it is snug by design). Align the clamp cut out with the clamp of your desk mount portion of the compass arm and then push down gently until the assembly sits in place as usual. That’s it, happy microphoning/cable-organising.
 

Printed in BambuLab PLA Matte – Charcoal, this colour selection almost perfectly matches the Blue Compass arm and looks almost as if it was part of the original design – in my opinion.

If you are looking to manage other cables at your desk, why not check out my knurled cable management clips - there are a range of sizes for all of your cable management needs. 
https://makerworld.com/en/collections/5608974-knurled-cable-clips