Pokemon - Chibi Zygarde 10%
Print Profile(2)
Description
This chibi model of Zygarde 10% comes in at a height of 5.5cm, and is designed to be printed without the need for an AMS!
The cover photo was printed using Bambu PLA matte charcoal, Bambu PLA jade white, Bambu PLA red, and eSun PLA matte matcha green.
Most of the parts for this model can be press fit together, however the two pieces for the snout will need a little bit of glue to keep them in place.
If you're not using the included print profile, I recommend printing this model at a layer height of 0.1mm. The body piece, collar piece, and foot piece will all require a brim for proper bed adhesion too. The bottom the left leg of the body piece will also require support, however, the rest of the model can be printed without supports. I'd also recommend increasing the number of bottom shell layers for the body piece and foot piece, as the model can be rather top heavy otherwise.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (35)