Crystal Statue - Spyro the Dragon w/ separate base

“Thank you for releasing me!”

This is a model of the crystal dragons found scattered among the Dragon Realms and are one of the main collectables from the PS1 classic game Spyro the Dragon.

The dragon itself is printed using PLA Silk, while the separate base is printed with standard PLA (I used mostle PLA Matte).

The dragon object has settings for printing with PLA Silk, which includes slower speeds for the walls, internal solid infill and overhangs. I have made the speeds quite slow to ensure there is minimal blemishes, but you should be fine to increase to 50mm/s ti reduce the print time. If you are using standard PLA for the dragon these should be fine to set back to default settings to reduce the print time.

All components of the print are multi-colour and so will require an AMS.

The base insert should pop nicely into the statue base so it holds solid, but the dragon is completely separate. If you'd like to connect the statue to the base permanently I would recommend using Plastic Glue on the dragons feet and carefully gluing it to the base insert.

The model is based on drehmos's Dragon Statue With Base - Spyro (repaired 3mf+stl) posted on Thingiverse.

Filaments used:

Dragon Statue:

• Bambu PLA Silk+ Mint Green
• Bambu PLA Silk+ Gold

Statue Base:

• Bambu PLA Matte Ice Blue
• Bambu PLA Matte Ash Grey

Base Insert:

• Bambu PLA Matte Charcoal
• Bambu PLA Matte Dark Brown
• Bambu PLA Matte Desert Tan
• Bambu PLA Basic Red