Filament/Spool Rack Top Element - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Pinnassog

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 15% infill

Designer

4.8 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

176

174

Released

Description

Top Element for Filament Storage Rack

I love my filament storage rack from Brownbear. However, it looked unfinished to me since it is an extendable, stackable system. I designed a matching element to be used as the top layer.

The top element is tested and in use with v2 of the rack system. According to the description of the original creation, it should be compatible with both v1 as well. It provides the following benefits in combination with the original model:

The same honeycomb design and measurements for pole holes
Element high enough to guarantee stability toward the side

Use

Print two (or more if you have a wider rack with a middle support) to be used as the top layer of your rack
Set up along the other rack elements

Filament

176.79g of PLA Matte filament per set of 4 (Bambu Lab 11100 PLA Matte Ivory White)
approx. 4h print time

Comment & Rating (16)

@FurrySalad

Print Profile

0.2mm layer, 4 walls, 15% infill

Looks amazing.

The profile uploader has replied

@Pinnassog

Thank you for the feedback. Your print looks amazing. Which green filament did you use?

@dickenserm

Print Profile

0.2mm layer, 4 walls, 15% infill

Perfect finish for my shelf :)

The profile uploader has replied

Show original

@Pinnassog

Thanks for the feedback. Looks like a nice setup.

(Edited)

@user_1697954645

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

Excellent design and print. I printed it 8 levels high, with PETG. I printed bushing and used 3/4" Schedule 40 PVC.

The profile uploader has replied

@Pinnassog

That is massive. Love it.

@user_4014397806

Boosted

I will be printing off your tops for the rack, but I am curious, how thick did you make your end caps for the dowels? They are simple enough to quickly design them in Fusion 360, but I am curious how thick you made them to make sure the countersunk is deep enough.

The designer has replied

@Pinnassog

The total thickness of the piece is 9mm. 4mm for the exterior disc to match the design of the connector pieces and 5mm that go into the hole. I have sent you the design file in private. You can easily adjust the supported screw type using it.