Voronoi Egg shaped serving bowl
Print Profile(2)
Description
Voronoi serving bowl in egg shape.
At 80% the ideal size for serving chocolate Easter eggs.
At 100% scale also suitable for 7-8 real (boiled) Easter eggs.
Printing is with tree support. Be careful, the tree branches go through the holes in the wall! Before (gently!) breaking them loose, you must cut them with e.g. a pair of cutting pliers! This is to prevent you from breaking the voronoi wall. See also the image below:
I managed to print the model myself at 80% without support. This was with new (yellow) basic PLA from Bambu. However, I do not recommend this as a standard printing method because the many types of filament and their condition can produce a poor result. Printing without support should always be reworked for a good result (using a small knife) because some print lines sag a bit due to the lack of support.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)