E-11 Stormtrooper Blaster ROTJ - Easy Print
Print Profile(2)
Description
I have made a few E-11 blasters over the last 12 months but wanted to design one that was as easy as possible to print and assemble with no support scarring which I believe I have achieved with this model. There are no complex internal features with this model and no additional components are required apart from glue.
I personally printed these parts at 0.16mm layer height with 15% infill and the print results came out great. Any tree supports generated were extremely easy to remove and left very little marks. Some supports in the print profile have been manually removed since they were not needed.
There are also a few parts with ironing settings dialed in, these came out perfect for myself with an 18% flow but please adjust to best suit your own printer if there are issues.
Unfortunately, a couple of these parts are too large in Z height to fit an A1 Mini print area but it is up to you if you still want to give this a go and split up the parts further to fit your smaller printers.
A few images are attached below for guidance with the assembly.
Any questions, feel free to ask.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (178)