Request from Germany - Can Dispenser / Stacker - Free 3D Print Model

Search models, users, collections, and posts

Zzz3DSelkirk

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Short Bottom Lip - 0.24mm layer, 2 walls, 10% infill, Gyroid

Designer

6.2 h

1 plate

4.6(5)

0.2mm layer, 2 walls, 20% infill

Designer

17.4 h

2 plates

Open in Bambu Studio

Boost

Released

Description

This was a request from Germany. A 6-can dispenser made to the specifications of Fayla. Thank you for asking me. Obviously I have no way to test this design in Canada, so all input is valuable. The information I was given was a 400ml can, 112mm in height x 75mm in diameter. Let me know how it works! Two different versions, although they use about the same amount of filament. I used more infill than I normally do, to give it optimal strength but this may be changed to 10% - 15% infill if you would like to save time and material.

Comment & Rating (18)

@Faylamoon

Hi, the can dispenser is printed I printed it with 10% gyroid infill and 3 wall lines However, there is a major issue The front piece where the can is stopped is too large, and the can is difficult to remove I think that shortening it by approximately 05cm - 07cm would improve it, and the can could be removed without excessive force Otherwise, it is a top-quality print file

(Edited)

The designer has replied

Show original

@6xg4vty98s

My translate says shorten it by .5cm I think you need me to make it taller?

@Faylamoon

Replying to @6xg4vty98s :

The marked piece should be shortened slightly as the can passes through with difficulty It jams at the top where the arrow is 😅🙈 I believe 5-7mm would suffice if the marked piece tapered towards the bottom

Show original

@6xg4vty98s

Replying to @Faylamoon :

I see what you mean now.

@user_701549493

Print Profile

Short Bottom Lip - 0.24mm layer, 2 walls, 10% infill, Gyroid

multiple prints and it just gets ugly. still prints but doesn’t look great

The profile uploader has replied

@6xg4vty98s

Just wondering...what printer and filament??? Don't remember any complaints.

@user_701549493

P1S sunlu PLA

@Faylamoon

I would like to thank you in advance for the adapted file Images will follow as soon as we have filament again and it is printed :D Feel free to add the images here for others to see :D

The designer has replied

Show original

@6xg4vty98s

You are welcome and I really would like to post those picture to show it being used! Enjoy your coconut milk!

@Noerderiet

Boosted

Print Profile

Short Bottom Lip - 0.24mm layer, 2 walls, 10% infill, Gyroid

Printed perfectly, no issues at all. Very clean print and great finish. Fits EU cans precisely and is very sturdy. Great design!

@user_1670863228

Perfectly sized for euro sized cans. Lovely print, thank you.

@vgilbertson

Print Profile

Short Bottom Lip - 0.24mm layer, 2 walls, 10% infill, Gyroid

@Vincent_76

Print Profile

Short Bottom Lip - 0.24mm layer, 2 walls, 10% infill, Gyroid

@user_3859869154

Print Profile

Short Bottom Lip - 0.24mm layer, 2 walls, 10% infill, Gyroid

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Stackable Can Dispenser

zach13

7.2 k

2.5 k

Stacking box V2

HG_Design

19.3 k

6.3 k

Golf ball dispenser pro

christofer.jh

27.3 k

11.9 k

Toothpick Dispenser Print-in-Place

Its On My Mind

17.4 k

5.5 k