Princess Cadence

----------------------------

My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee

----------------------------

Princess Cadence from My Little Pony is another in my collection of My Little Pony prints found in my cartoon collection → here ←

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies of my Makerworld Designs is available. 

I also post exclusive designs on my Patreon. A commercial license to sell BOTH my Makerworld and Patreon files can be found here: https://www.patreon.com/busykikibee

----------------------------

Pictured frame, stand, or puzzle box can be found in Frames and Functional items over @CanadianGamer https://makerworld.com/@CanadianGamer/collections/1027330

All photos you see are of the actual print of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Project: Princess Cadence
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 8 unique filaments
PLA BambuLab Matte Dark Blue 
PLA BambuLab Basic Purple
PLA BambuLab Basic Hot Pink 
PLA BambuLab Basic Beige 
PLA BambuLab Matte Sakura Pink
PLA BambuLab Matte Lemon Yellow
PLA BambuLab Matte Ivory White 
PLA BambuLab Matte Sky Blue

Swap Instructions:
Start with Dark Blue
At layer #8 (0.72mm) swap to Purple
At layer #10 (0.88mm) swap to Hot Pink
At layer #14 (1.2mm) swap to Beige
At layer #17 (1.44mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Lemon Yellow
At layer #22 (1.84mm) swap to Ivory White
At layer #24 (2mm) swap to Sky Blue for the rest.

All photos you see are of the actual print. Using the same filament choices will give the same result. 3mf file is AMS ready to slice and print with height range modifier and layers prepared for you. If using the STL to print the file, apply color swaps by their mm height and use height modifications and infill instructions as per the directions provided. You can safely ignore any error message about floating regions. You do NOT need a prime tower if you are printing with the STL file. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Pictured frame, stand, or puzzle box are by @CanadianGamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330