Eotech G43 Killflash/Lens Protector

Having found no subtle lens protector for my Eotech G43 clone, I designed one myself in the style of a killflash.

I ensured it remained as unobtrusive as possible without compromising protection.

It was also important to me to restrict the field of vision as little as possible.

The inner diameter of the hexagons is 5.5mm (protects against 6mm BBs).

The grid thickness is 2.00mm, the total thickness 2.8mm (thus flush with the frame).

The struts between the hexagons are designed to be as thin as possible at 0.8mm without compromising stability.

The grid is simply clamped directly in front of the lens, into the magnifier frame.

Depending on the accuracy of your printer and the dimensions of your individual G43, the size can be adjusted in the slicer in the X and Y directions.

To prevent it from falling out, it should fit as tightly as possible.

To improve protection, you can increase the thickness of the grid in the Z direction in the slicer (but the grid will no longer be flush with the frame).

I printed it from Bambu PLA Matte (Charcoal).

Other materials such as PETG, ABS or ASA are certainly also suitable.

Since there is always a residual risk of damage, I exclude any kind of warranty and guarantee.