StealthyHydra

cover

PXL_20250320_152459985.MP.jpg

PXL_20250320_152537450.MP.jpg

PXL_20250320_152716035.MP.jpg

plate_1.png

2025-03-20_b22380007ff7.jpg

0.2mm layer, 2 walls, 33% infill

VB3522

IMG_20260706_225240.jpg

首先感谢作者的开源分享，非常棒的模型，再次感谢！！但是小LOGO因为尺寸问题，用0.4喷嘴打印的话很难成功，经过大概15次首层测试，测试出了一个可以打印的配置分享给大家。首层线宽0.4、A墙，最小线宽25、首层速度30，首层空驶加速度200，首层速度100。经过我观察，失败的主要原因一是线宽太粗，二是打完之后回抽速度太快会把最后一点带起来。我用petg哑光打印的，别的耗材应该都可以，但是尽量不要动打印配置。

First, thanks to the author for the open-source sharing, it is a great model, thanks againBut the small LOGO has size issues, making it difficult to print successfully with a 0.4 nozzle After about 15 first layer tests, a printable profile was found and is being shared with everyoneFirst layer line width 0.4, A perimeter, minimum line width 25, first layer speed 30, first layer travel acceleration 200, first layer speed 100From my observation, the main reason for failure is that the line width is too thick, and second, the retraction speed is too fast after printing, which pulls up the last bitI printed it with PETG Matte, other filaments should be fine, but try not to change the print profile

0.24mm layer, 2 walls, 33% infill

akristofic

PS5 slim CD horizontal stand

SammyJ2

Right leg remix

Horizontal stand for PS5 slim disc edition.&nbsp;Remixed to include PS5 logo.&nbsp;The parts are oriented on the plate so that the outer side of the stand is face down. This creates a really nice finish on the parts when using a textured print plate.

PS5 slim Disc drive horizontal stand with logo

PS5 slim Disc drive horizontal stand without logo

ASIA

Print Profile(2)

Description

Comment & Rating (128)

This remix is based on

License

Remixes (1)

Related Models